Compatible Nelllcor Adult soft Direct-Connect SpO2 Sensor

Equipment: * Connect the sensor cable to the appropriate device (pulse oximeter) * Turn on the device and check correct operation by consulting the monitor's operating instructions. *To ensure proper operation of the monitor, please connect and disconnect the sensor cable from the monitor cable. Use correctly and safely
The sensor and its connecting cable require system inspection at least once or more per month, depending on frequency of use and sanitization of the cable *Visual inspection (appearance of insulator, connector contact pins, etc.) *Verification of mechanical integrity of the connector Do not use and discard any sensor with mechanical or electrical defects. The operating conditions of the SpO2 sensor and its cable are as follows: *Ambient temperature: 0° to +40° C
*Relative humidity: 0 to 80%
*Atmospheric pressure: 860 to 1060 HPa For use of SpO2 sensors and their connecting cables in departments where compliance with sterility levels is required, Med Accessories recommends the following cleaning, disinfection or sterilization methods:

Cleaning equipment: Clean the sensor and its connecting cable with warm soapy water. The probe and cable must be cleaned with a soft cloth moistened with soapy water or 70% isopropyl alcohol. Be careful to avoid damage
Visual indicators and detector surfaces. Allow the probe and cable to dry thoroughly before use. Do not use any abrasives or chemicals other than 70% isopropyl alcohol
Do not irradiate, autoclave, soak, or immerse the probe in any type of solution. Keep the probe clean and dry. Under the conditions of use advocated in these operating instructions, the average life expectancy of the SpO2 sensor is more than one year.

During the Warranty Period: Med Accessories offers a warranty on its products that includes replacement for any quality-related issues that arise within the specified warranty period. This warranty applies to normal conditions of use. If a quality issue occurs during the warranty period, Med Accessories will provide replacement service to correct the problem.

Compatibility Guarantee: Med Accessories understands the importance of compatibility between its products and the devices with which they are intended to be used. If after purchasing a Med Accessories product it is discovered that the product is incompatible with the specific device for which it was intended, Med Accessories will take immediate action. They will provide a new replacement that is compatible with the customer's device or provide a refund on the purchase.